i9003XXKPQ 2.3.6 Gingerbread Firmware

This is the latest Firmware of Samsung i9003 Galaxy Sl and other dev's focus here for its development..
You will be instructed by this page for you to have this firmware without using your kies..

Requirements:
i9003XXKPE Firmware - clickhere
i9003XXKPQ Firmware - clickhere
password: sampro.pl


GUIDE:

1. Firstly, Download the 2.3.5 firmware from Przekret's thread
2. Run Odin3 v1.83
3. Set your phone to download mode : Press Volume down + OK first, then hold Power button.
4. Connect your phone, you should see Odin shows your phone is Added with COM number.
5. Click PIT button and select this file: latona_20110114.pit
6. You should see Re-Partition, Auto Reboot and F. Reset Time checked.
7. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
8. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
9. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
10. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar
11. Click Start button to flash these files to phone.
12. Do not touch anything till you see PASS on the program window.
13. Turn off the phone and set it back into download mode once you get an initial first boot to homescreen. Do not set up anything, Just power off and set to download mode.
Note: You only need to flash once to XXKPE before proceeding to XXKPQ
14. In Odin, press Reset button. Re-partition should be unchecked automatically.
15. Select file I9003XXKPQ_I9003XXKPQ_I9003SERKPQ_HOME.tar as PDA
16. Click on Start to flash XXKPQ PDA to phone
17. Once you have flashed, after the phone started up, press *#1234# and check your PDA,Phone and CSC, everything should ended with KPQ
18. Factory reset and enjoy

Read more »

i9003XXKPM 2.3.5 Gingerbread Firmware Update 10/201111

This is the instruction on How you can update your Samsung i9003 Galaxy SL firmware to XXKPM 2.3.5 Gingerbread..

requirements:
i9003XXKPE 2.3.4 Gingerbread Firmware - clickhere
i9003XXKPM 2.3.5 Gingerbread Firmware - clickhere
password: samfirmware.com

Note: XXKPM can only be flashed with help from it's supporting predecessor XXKPE like the XXKPH series, So make sure you have XXKPE downloaded. User flashing version varies with this, but this is my successful 100% assured boot.
1. Firstly, Download the XXKPE and XXKPM Firmware
2. Run Odin3 v1.83
3. Set your phone to download mode : Press Volume down + OK first, then hold Power button.
4. Connect your phone, you should see Odin shows your phone is Added with COM number.
5. Click PIT button and select this file: latona_20110114.pit
6. You should see Re-Partition, Auto Reboot and F. Reset Time checked.
7. Click PDA button and select this file: CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar
8. Click PHONE button and select this file: MODEM_I9003XXKPE_REV_00_CL1041909.tar
9. Click BOOTLOADER button and select this file: APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar
10. Click CSC button and select this file: GT-I9003-CSC-MULTI-OXAKPE.tar
11. Click Start button to flash these files to phone.
12. Do not touch anything till you see PASS on the program window.
13. Turn off the phone and set it back into download mode once you get an initial first boot to homescreen. Do not set up anything, Just power off and set to download mode.
Note: You only need to flash once to XXKPE before proceeding to XXKPM
14. In Odin, press Reset button. Re-partition should be unchecked automatically.
15. Select file I9003XXKPM_I9003XXKPM_I9003SERKPM_HOME.tar.md5 as PDA
16. Click on Start to flash XXKPM PDA to phone
17. Once you have flashed, after the phone started up, press *#1234# and check your PDA,Phone and CSC, everything should ended with KPM
18. Factory reset and enjoy

Read more »

i9003DXKP9 Firmware 2.3.5 10/28/2011

This Firmware is been release thru Samsung kies in Southeast Asia...
but if your kies can't detect this update we can have it, by flashing thru Odin.. :) this is includes the turorial on how you can flash from other firmware to this DXKP9 2.3.5 Gingerbread firmware.. :)

requirements:
DXKF1 froyo Firmware- clickhere
DXKP9 Gingerbread Firmware- clickhere
password is : samfirmware.com


You will need 1st to download the DXKF1 Froyo firmware.. why? because this firmware contains the complete files of asian firmware.. that is Bootloader, PDA, Phone, and CSC.. from this we can have a clean Flash of Asian firmware.. :)
Then download the DXKP9 Gingerbread Firmware, you will see that this firmware contains only 1 file that we will be needing soon as the flashing goes by..

then here is the guide..

Guide:

1. Flash DXKF1 (download & extract files first) using ODIN:
- Open ODIN check Re-Partition, Auto Reboot, F.Reset Time
- Click PIT button choose: latona_20110114.pit
- Shutdown phone
- Simultaneously click and hold Vol.Down+Home+Power buttons (Download Mode)
- Connect phone to PC via Data Cable. (make sure ID:COM box in Odin highlighted yellow)
- Click ODIN's Start button
- Wait for "PASS!" to appear on top left corner of ODIN
- After PASS! click reset button (Re-Partition should be unchecked)
- Click PDA button and choose: I9003DXKF1-REV08-ALL-low-CL1020446.tar.md5
- Click PHONE button and choose: MODEM_I9003DXKB2_REV_00_CL863799.tar.md5
- Click CSC button and choose: GT-I9003-CSC-MULTI-OLBKB2.tar.md5
- Click Start and wait for "PASS!"


2. After reboot do not setup just shutdown and enter Download Mode.


3. Flash DXKP9 as PDA through ODIN:
- Open ODIN
- Click PDA button and choose: I9003DXKP9_I9003OLBKP7_I9003DXKP7_HOME.tar.md5
- Conect phone to PC via Data Cable (make sure ID:COM box in Odin highlighted yellow)
- Click Start button and wait for "PASS!"
4. After reboot, shutdown
5. Simultaneously click and hold Vol.Up+Home+Power buttons to enter Recovery Mode
6. Using volume buttons choose "wipe cache partition" and pres Home button
7. Choose "wipe data/factory reset" and press Home button
8. Choose "reboot system now" and press Home button to Reboot the phone
9. Complete phone setup dialogue, and test everything: Wifi,2G,3G,Mail Notification,GPS.
10. DONE!!
Congratulations!!

Read more »

IRIS

       -is a "SIRI" application for Android.

The voice control is now been part of Android development. Siri is now breaking the fun with its superior search and capabilities. However the team from dexetra.com build a Siri like application for android.
Its called "IRIS". Iris also allows you to search on various topics, the translations of works of art, history and more. Now we ask, "What is the fish?" And he answers in the article Wikipedia focusing our finned friends.
This app will soon be available in the market, but I recently found and tested this, but its pretty cool. Android uses text-to-speech features is meant the application of fundamental issues and Narayan and his friends, all the better time.
The coolest is? Hours of eight finish in app.

                                              if you want to try it you can download the apk here.

Read more »

Gingerbread 2.3.5 XXKPM Firmware for i9003 SL

Gingerbread 2.3.5 XXKPM Firmware for Samsung i9003 galaxy SL released..
Thank you samfirmware.com for this update!

XXKPM FIRMWARE DOWNLOAD
password: samfirmware.com

Installation guide:
1st Flash XXKPE Firmware via odin
2nd put XXKPM file to PDA in odin then flash

note: pls do a factory reset in every firmware flashed.. :)
happy flashing to all!

Read more »