4:43 PM
mjBri
This Firmware is been release thru Samsung kies in Southeast Asia...
but if your kies can't detect this update we can have it, by flashing thru Odin.. :) this is includes the turorial on how you can flash from other firmware to this DXKP9 2.3.5 Gingerbread firmware.. :)
requirements:
DXKF1 froyo Firmware- clickhere
DXKP9 Gingerbread Firmware- clickhere
password is : samfirmware.com
You will need 1st to download the DXKF1 Froyo firmware.. why? because this firmware contains the complete files of asian firmware.. that is Bootloader, PDA, Phone, and CSC.. from this we can have a clean Flash of Asian firmware.. :)
Then download the DXKP9 Gingerbread Firmware, you will see that this firmware contains only 1 file that we will be needing soon as the flashing goes by..
then here is the guide..
Guide:
1. Flash DXKF1 (download & extract files first) using ODIN:
- Open ODIN check Re-Partition, Auto Reboot, F.Reset Time
- Click PIT button choose: latona_20110114.pit
- Shutdown phone
- Simultaneously click and hold Vol.Down+Home+Power buttons (Download Mode)
- Connect phone to PC via Data Cable. (make sure ID:COM box in Odin highlighted yellow)
- Click ODIN's Start button
- Wait for "PASS!" to appear on top left corner of ODIN
- After PASS! click reset button (Re-Partition should be unchecked)
- Click PDA button and choose: I9003DXKF1-REV08-ALL-low-CL1020446.tar.md5
- Click PHONE button and choose: MODEM_I9003DXKB2_REV_00_CL863799.tar.md5
- Click CSC button and choose: GT-I9003-CSC-MULTI-OLBKB2.tar.md5
- Click Start and wait for "PASS!"
2. After reboot do not setup just shutdown and enter Download Mode.
3. Flash DXKP9 as PDA through ODIN:
- Open ODIN
- Click PDA button and choose: I9003DXKP9_I9003OLBKP7_I9003DXKP7_HOME.tar.md5
- Conect phone to PC via Data Cable (make sure ID:COM box in Odin highlighted yellow)
- Click Start button and wait for "PASS!"
4. After reboot, shutdown
5. Simultaneously click and hold Vol.Up+Home+Power buttons to enter Recovery Mode
6. Using volume buttons choose "wipe cache partition" and pres Home button
7. Choose "wipe data/factory reset" and press Home button
8. Choose "reboot system now" and press Home button to Reboot the phone
9. Complete phone setup dialogue, and test everything: Wifi,2G,3G,Mail Notification,GPS.
10. DONE!!
Congratulations!!
but if your kies can't detect this update we can have it, by flashing thru Odin.. :) this is includes the turorial on how you can flash from other firmware to this DXKP9 2.3.5 Gingerbread firmware.. :)
requirements:
DXKF1 froyo Firmware- clickhere
DXKP9 Gingerbread Firmware- clickhere
password is : samfirmware.com
You will need 1st to download the DXKF1 Froyo firmware.. why? because this firmware contains the complete files of asian firmware.. that is Bootloader, PDA, Phone, and CSC.. from this we can have a clean Flash of Asian firmware.. :)
Then download the DXKP9 Gingerbread Firmware, you will see that this firmware contains only 1 file that we will be needing soon as the flashing goes by..
then here is the guide..
Guide:
1. Flash DXKF1 (download & extract files first) using ODIN:
- Open ODIN check Re-Partition, Auto Reboot, F.Reset Time
- Click PIT button choose: latona_20110114.pit
- Shutdown phone
- Simultaneously click and hold Vol.Down+Home+Power buttons (Download Mode)
- Connect phone to PC via Data Cable. (make sure ID:COM box in Odin highlighted yellow)
- Click ODIN's Start button
- Wait for "PASS!" to appear on top left corner of ODIN
- After PASS! click reset button (Re-Partition should be unchecked)
- Click PDA button and choose: I9003DXKF1-REV08-ALL-low-CL1020446.tar.md5
- Click PHONE button and choose: MODEM_I9003DXKB2_REV_00_CL863799.tar.md5
- Click CSC button and choose: GT-I9003-CSC-MULTI-OLBKB2.tar.md5
- Click Start and wait for "PASS!"
2. After reboot do not setup just shutdown and enter Download Mode.
3. Flash DXKP9 as PDA through ODIN:
- Open ODIN
- Click PDA button and choose: I9003DXKP9_I9003OLBKP7_I9003DXKP7_HOME.tar.md5
- Conect phone to PC via Data Cable (make sure ID:COM box in Odin highlighted yellow)
- Click Start button and wait for "PASS!"
4. After reboot, shutdown
5. Simultaneously click and hold Vol.Up+Home+Power buttons to enter Recovery Mode
6. Using volume buttons choose "wipe cache partition" and pres Home button
7. Choose "wipe data/factory reset" and press Home button
8. Choose "reboot system now" and press Home button to Reboot the phone
9. Complete phone setup dialogue, and test everything: Wifi,2G,3G,Mail Notification,GPS.
10. DONE!!
Congratulations!!
